04-16-2022 08:43 PM - edited 04-17-2022 02:08 AM
Hello everyone. I recently purchased the Canon Vixia GX10 refurbished by Canon purchased by B&H and got an extended warranty. I have noticed there is noise in low light. I thought that would not be as bad with a 1" sensor. I use this camera and it looks great in the daytime but when I take it on a ride at Disneyland it's not clear. I use it in manual mode I shoot in 4k 60fps, my shutter speed is 120 and when you play with the gain it's still hard to see on the screen.I have the aperture as low as I can go f2. Can anyone suggest the best setting to fix this? Using the latest firmware for this camera 1.0.4.0.
01-18-2023 04:24 PM
This is not a DSLR. This is a video camera I use.. 😜
01-18-2023 05:07 PM
Check out This Post I did a while back which showed how two different video cameras dealt with a very dark scene. I was beyond the limits of what a Vixia HF G50 could deal with. When using an EOS C70 (same f/2.8 aperture), the differences were huge.
Small-sensor cameras have many advantages. But they just cannot deal with low-light scenarios. Unless you can add light, you'll end up with very noisy and most likely underexposed footage.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.