06-13-2021 11:47 PM
I'm trying to use my HF G50 camcorder as a live video source in visual performances with an old video mixer, specifically a VIDEONICS MX-1. Unfortunately the signal coming from the mini HDMI output seems like its only compatible with a standard HDMI monitor. I get no signal when using the HDMI to RCA cable that works just fine with my computer. I get no signal when going straight into the projector.
Has anyone had any luck getting a signal on anything other than a hdmi monitor? Is there a converter or a processor that can expand on whats "compatible" with this camcorder?
I appreciate any assistance!
07-09-2021 03:45 PM - last edited on 12-02-2022 12:50 PM by Danny
I have not tried this nor do I have a HF G50 camera. I would recomend trying an adapter with a power supply. Check this link at Amazon for a possible solution. I have found some signals need power / amplification to work on other devices.
[Commercial link removed and replaced with screenshot to facilitate discussion.]
09-13-2021 01:10 PM
Anytime you have an HDMI signal you have to convert it to a format suitable for your computer or other device. I have used an Elgato Cam Live (available on Amazon). I also am using a Blackmagic ATEM Mini switcher for live streaming to Facebook, Zoom, etc. for live church services. That unit has a built-in converter, so none needed. This will be the case for any video camera with an HDMI feed.
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 22.214.171.124
PowerShot SX420 IS - Version 126.96.36.199
PowerShot 620 HS - Version 188.8.131.52
PowerShot SX720 HS - Version 184.108.40.206
PowerShot G1X Mark III - Version 220.127.116.11
PowerShot G7X Mark II - Version 18.104.22.168
PowerShot G9X Mark II - Version 22.214.171.124
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.