Canon Community

kodiakcreativit · 08-26-2026

Posted about this in another thread, thought a separate one would be in order.I just updated the camera to Firmware 1.1.3.1.Problem is my R5 C will not power on even with a full battery in photo or video mode if I have an external PD power supply con...

kodiakcreativit · 08-13-2025

Easy to do with the photo side settings. That doesn't seem to save the video settings though. Every time I update firmware it wipes all my video settings and I have to go back through and reset everything one setting at a time. There must be a way to...

kodiakcreativit · 07-11-2023

Hoping someone can help me out here...R5 C, plus a sound recorder with HDMI passthrough which is able to lock to timecode using that HDMI. specifically, TASCAM DR-701D.When connected by HDMI and both powered on the recorder locks timecode to the R5 C...

kodiakcreativit · 09-01-2022

The rubber port covers/dust covers on the side of the Canon R5 and R5 C, usually these can be removed just by pulling the little tether out of the hole and can be reinstalled by pushing it back in. Before I risk breaking the cover and being without i...

kodiakcreativit · 08-15-2022

Quick question to see if anyone knows what the problem could beCanon R5 C camera with the EF->RF adapter (the one with the control ring) plus a Sigma EX series 10-20mm lens. This is a crop sensor lens.when I use this combination together in video mod...

kodiakcreativit · 08-28-2026

I really appreciate your help!I will give a delay a try, although I found the other post you were referring to and was surprised that that user was talking about this delay involving the KB dummy battery. Its the same product that I use myself, but I...

kodiakcreativit · 08-27-2026

Thank you!That is very interesting, especially if its just some kind of delay and possibly on the side of the VMount base. The battery has PD ports on it as well I could always try to plug in just to the battery itself. I also sometimes use a KB dumm...

kodiakcreativit · 08-27-2026

Thanks! I found that thread while I was searching around but I haven't read the whole thing. I think I will.I recorded a video of what the camera is doing. I guess #1 am I correct that this is not normal? and #2 what should I do about it?thanks for t...

kodiakcreativit · 08-26-2026

I wonder how wide spread the problem might be. Since I saw exactly the same issue as the original poster.Mine made another sound recently but I'm pretty sure it was dust or some other kind of debris in the cooling fan area, some compressed air seems ...

kodiakcreativit · 08-26-2026

Mine has started to do the same thing within the last couple of months. Video mode, when turning off a series of mechanical clicks then the camera turns off normally. when running it operates without issue, just a noise on shut down. It doesn't happe...

Canon Community

User Statistics

User Activity

R5 C won't power on with PD connected, even with a full battery

Save/restore VIDEO settings on R5 C to SD card

R5 C remote recording via HDMI stopped working after firmware update

R5/R5 C port covers, how to remove/reinstall

R5 C won't work with Sigma lens in video mode, but works in photo mode

Re: R5 C won't power on with PD connected, even with a full battery

Re: R5 C won't power on with PD connected, even with a full battery

Re: R5 C won't power on with PD connected, even with a full battery

Re: Unusual Shutter Sound During Shutdown - Canon R5C

Re: Unusual Shutter Sound During Shutdown - Canon R5C