Speedlite Flashes
cancel
Showing results for 
Search instead for 
Did you mean: 

Posts

Resolved! 580EX II on a 6D - issues with exposure

I have a new 6D, and I am trying to do some 'test' portraits with my 580EX II. I'm using ETTL mode; and aperture priority. I was able to adjust exposure compensation when using my previous camera (1D3) but I can;t seem to be able to soften the intens...

IMG_0487.jpg
javapop by Contributor
  • 7851 Views
  • 5 replies
  • 0 likes

Canon 600EX

Hello all. I wanted to know if there is a way to turn down the brightness of the flash. Say if I am in a dark setting and I just want a little bit of light to fill in the subject. Also what  does the setting that change the flashes 50mm to 100mm do? ...

Over exposure

  I wanted to photograph my new grandaughter. I  used a pocket wizard TT1 to fire  my 580EX II which was mounted on a Pocket wizard TT5.  Firing into an umbrela, the 580 speedlite was set to manual full power. I used a light  meter to measure the out...

Henik by Apprentice
  • 4942 Views
  • 6 replies
  • 0 likes

group mode with 600 rt problem

Having trouble with the 600 rt in group mode. I have two 600 rt's and a 5d mk3....I have been trying to use these in group mode with limited success. I was trying to use the groups in ettl mode. My on camera flash is the master and the off camera is ...

Canon Speedlight 270 EX as a macro off camera flash?

Hi,I´m considering to buy tomorrow, a second hand unit for a nice price (+-50,00 USD) of the older Canon Speedlight 270 EX (not the version II) as a macro off camera flash?The bounce head feature seems a nice way to use for my macro subjects (for bou...

Cunha by Rising Star
  • 4679 Views
  • 7 replies
  • 0 likes

Can't change speedlight settings

I'm attempting to get my 580EXII off camera ... I I have a unversal hotshoe and wire setup ... but sometimes when I attempt to adjust the settings on the slave (I managed to set it to slave!) by following the manual the speedlight is not doing what t...

crockny by Enthusiast
  • 5059 Views
  • 6 replies
  • 0 likes
Getting started

New to the community? Here's some information to help you get acquainted:

Announcements

08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/30/2022: Service Notice: EOS 70D: Error 70 or Error 80
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!
12/7/2021: New firmware version 1.3.0 is available for Mount Adapter EF-EOS R 0.71x