11-05-2012 03:04 PM
I have used my Canon 430EX speedlite both on camera and off (using radio poppers when off). Recently I found out that I could use my speedlite wireless with the Canon 7D and did some senior pictures this way. I am now trying to use the flash on camera again and it is not firing. I reset my flash settings in the camera, but it still doesn't work. I have replaced the batteries, but it still doesn't work. Any suggestions? Thanks!
11-11-2012 02:29 PM
Is the 430 still in slave mode?
03-27-2019 08:21 PM
Assuming that the flash functionality is enabled in the flash control menu, then I would just try cleaning off the flash's foot and the camera's hotshoe.
03-27-2019 11:39 PM
I assume that after 7 years they have moved on.
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 126.96.36.199
PowerShot SX420 IS - Version 188.8.131.52
PowerShot 620 HS - Version 184.108.40.206
PowerShot SX720 HS - Version 220.127.116.11
PowerShot G1X Mark III - Version 18.104.22.168
PowerShot G7X Mark II - Version 22.214.171.124
PowerShot G9X Mark II - Version 126.96.36.199
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.