cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Canon MR-14EX II only one side fires

kparseg
Contributor

Hello guys! I'm sure there is a simple solution to my problem but I can't figure it out myself. I've purchased Canon MR-14EX II Macro ring flash and when I try to take pictures, only one side of the flash fires. What am I doing wrong? Thank you!

1 ACCEPTED SOLUTION

cicopo
Elite

I have Ver 1 and had an even older model so I suspect setting are similar. Check your manual for the section on "Setting the Flash Ratio". You can turn off either side should you want to, which may explain your problem. .

"A skill is developed through constant practice with a passion to improve, not bought."

View solution in original post

1 REPLY 1

cicopo
Elite

I have Ver 1 and had an even older model so I suspect setting are similar. Check your manual for the section on "Setting the Flash Ratio". You can turn off either side should you want to, which may explain your problem. .

"A skill is developed through constant practice with a passion to improve, not bought."
Announcements
09/19/2022: New firmware version 1.0.4.1 is available for EOS C70
08/31/2022: New firmware version 1.1.1 is available forRF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!