01-22-2021 12:52 PM
I used to use my 580exII on my 5DmkII for events and the flash would send out a red focus assist beam. It helped immensely when working events at night.
It doesn't seem to do that when I use it on my 5DSR and I just can't seem to get good focus in low light.
Is there a setting that needs to be changed? or is it not compatible with the 580exII? or is my flash not working correctly?
Thanks!
-Brian
Solved! Go to Solution.
01-22-2021 06:20 PM
The red focus assist light only works in "One Shot" AF. Check and see if you are in AI Servo AF mode.
01-22-2021 06:20 PM
The red focus assist light only works in "One Shot" AF. Check and see if you are in AI Servo AF mode.
01-22-2021 07:46 PM
Ahh ok, yes I'm almost always in AI servo mode. I'll have to give that a try. thanks!
05-20-2021 10:22 AM
Hi Mike,
That was the issue. thanks for helping.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.