01-22-2021 12:52 PM
I used to use my 580exII on my 5DmkII for events and the flash would send out a red focus assist beam. It helped immensely when working events at night.
It doesn't seem to do that when I use it on my 5DSR and I just can't seem to get good focus in low light.
Is there a setting that needs to be changed? or is it not compatible with the 580exII? or is my flash not working correctly?
Thanks!
-Brian
Solved! Go to Solution.
01-22-2021 06:20 PM
The red focus assist light only works in "One Shot" AF. Check and see if you are in AI Servo AF mode.
01-22-2021 06:20 PM
The red focus assist light only works in "One Shot" AF. Check and see if you are in AI Servo AF mode.
01-22-2021 07:46 PM
Ahh ok, yes I'm almost always in AI servo mode. I'll have to give that a try. thanks!
05-20-2021 10:22 AM
Hi Mike,
That was the issue. thanks for helping.
09/26/2023: New firmware updates are available.
CN-E45-135mm T 2.4 L F - Version 1.4.0
EOS 1DX Mark III - Version 1.8.0
EOS R6 Mark II - Version 1.2.0
08/18/2023: Canon EOS R5 C training series is released.
07/31/2023: New firmware updates are available.
05/31/2023: New firmware updates are available.
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
PowerShot Elph 360HS - Version 1.1.0.0
PowerShot SX420 IS - Version 1.1.0.0
PowerShot 620 HS - Version 1.1.0.0
PowerShot SX720 HS - Version 1.1.0.0
PowerShot G1X Mark III - Version 1.1.0.0
PowerShot G7X Mark II - Version 1.2.0.0
PowerShot G9X Mark II - Version 1.1.0.0
03/30/2023: New firmware updates are available.
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.