08-11-2015 11:35 AM
08-11-2015 10:38 PM
08-13-2015 09:32 AM
Keep in mind the window on the front of the flash has to be able to 'see' the camera's on camera flash in order to opperate as a slave This means if you want the flash facing away from the camera you would need something to reflect the cameras flash to the front of the 270EX II.
08-13-2015 10:46 AM
Keep in mind the flash is "optically" triggered by the on-camera flash of your T6s. It is not radio. It must have line-of-sight. Make sure you've read through pages 189-200 of your T6s manual.
The head on the 270EX II can be tilted upward, but does not swivel side-to-side (like the 430EX II, 430EX III-RT, or 600EX-RT). On those flashes that have swivel heads, you'd normally rotate the lower body so that the sensor panel is facing the camera, but swivel the head to wherever you want to direct the light. On the 270EX II you can't do that... which means the 270EX II will probably just catch the reflection of the light. Consequently, the 270EX II will be limited in use outdoors (where big open spaces means there's not much that can reflect the light) and will probably work better indoors (where ceilings and walls will reflect light.)
If in doubt that the 270EX II is able to notice the on-camera flash firing then you should try this in a small room with white walls or just put the slave flash in front of the camera (a few feet away) and have it face the camera (so the sensor on the 270EX II cannot possibly miss the on-camera flash firing. The on-camera pop-up flash is what triggers the 270EX II -- technically the camera fires a "pre-flash" before the shutter is even open ... the slave then fires just a fraction of a second later (after the camera shutter has had time to open.) You have the choice of having ONLY the slave flash fire (when shutter is open -- because you'll _always_ see the on-camera flash fire the "pre-flash"), or have both flashes fire when the shutter is open (you can even control the ratio or power level of each flash.)
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 18.104.22.168
PowerShot SX420 IS - Version 22.214.171.124
PowerShot 620 HS - Version 126.96.36.199
PowerShot SX720 HS - Version 188.8.131.52
PowerShot G1X Mark III - Version 184.108.40.206
PowerShot G7X Mark II - Version 220.127.116.11
PowerShot G9X Mark II - Version 18.104.22.168
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.