04-28-2023 11:48 AM - last edited on 04-28-2023 11:49 AM by Danny
I am attempting to have our ImageFormula DR-9080C scan both sides of a document through CapturePerfect 3.1, but despite selecting either 'Duplex' or 'Skip Blank Page' it will on scan one side of the document. This opens a "Caution" window.
The caution window reads "Scanning side is set to front-side and back-side or skip blank page, but scan front side only. Do you continue this scan?"
The scanner settings are listed here:
Mode: 256-Level Gray
Page Size: Auto-Detection
Dots Per Inch: 300 dpi
Scanning Side: Skip Blank Page
Feeding Option: Standard Feeding
Batch Seperation: None
04-28-2023 11:51 AM
Thanks for letting us know what Canon product you've got. The imageFORMULA DR-9080C is an older model which we have retired. While that means that Canon USA no longer offers direct hardware or software support for it, your friends here in the Canon Community are welcome to offer suggestions!
You can also speak with a Canon Upgrade Program specialist to help you score a modern replacement that would meet your current needs at a discount. You can reach them weekdays and Saturdays at 1-866-443-8002.
Hope this helps!
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.