08-25-2024 12:31 PM
Just got a ImageFORMULA P-208II from Amazon Resale. Plugged it into a USB port on my computer, pushed the on/off button, and no light comes on. Switched the auto switch on and off. Nothing. Is this broken or not?
Thanks,
Solved! Go to Solution.
08-25-2024 12:48 PM
Hello, and welcome to the Canon Community.
Please ensure you're following the power-on procedure as laid out in the MANUAL starting on Page 20:
08-25-2024 12:48 PM
Hello, and welcome to the Canon Community.
Please ensure you're following the power-on procedure as laid out in the MANUAL starting on Page 20:
08-25-2024 01:00 PM
Thanks. I didn't have access to the setup guide.
08-25-2024 01:06 PM - edited 08-25-2024 01:07 PM
Did the link not work (the word MANUAL above is a hyperlink)? I'm sorry.
You will find it on THIS PAGE 👈🏻Tap
Then tap Manuals:
It'll jump to where you should be. Look for the one that says imageFORMULA P-208II User Manual:
And over to the right, tap the VIEW button:
It'll download a PDF of the manual. 😊
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.