11-30-2016 10:38 PM
Face Detection and Tracking is greyed out and I can't figure out how to active it. Using Canon 70 -200 2.8 & Canon 24-105 4.0 Has anyone else run into this issue?
Solved! Go to Solution.
10-24-2017 03:32 PM
I ended up resetting the camera to factory settings, which worked.
10-24-2017 04:00 PM
Wao, Thanks for the fast reply and for the solution:
after the reset, the Face detection is active again.
09-03-2020 02:40 PM - edited 09-03-2020 02:41 PM
This happened to me as well and I discovered that at some point I had assigned one of the assignable numbers to "Face AF". Without realizing I or someone else had hit that number which set AF for face detection off, and AF was greyed out.
When some reset to factory settings, this likely resolved the issue, but it really is just a matter of discovering what number has been assigned to this feature and hit the button once to get AF back!
09/26/2023: New firmware updates are available.
CN-E45-135mm T 2.4 L F - Version 1.4.0
EOS 1DX Mark III - Version 1.8.0
EOS R6 Mark II - Version 1.2.0
08/18/2023: Canon EOS R5 C training series is released.
07/31/2023: New firmware updates are available.
05/31/2023: New firmware updates are available.
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
PowerShot Elph 360HS - Version 1.1.0.0
PowerShot SX420 IS - Version 1.1.0.0
PowerShot 620 HS - Version 1.1.0.0
PowerShot SX720 HS - Version 1.1.0.0
PowerShot G1X Mark III - Version 1.1.0.0
PowerShot G7X Mark II - Version 1.2.0.0
PowerShot G9X Mark II - Version 1.1.0.0
03/30/2023: New firmware updates are available.
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.