cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

C70 Machine Sounds In Audio

Nyerik123
Apprentice

Hi

 

im using a c70 and Senheisser mke 600. I used to get crisp clean audio. But after reviewing footage this week, my audio has machine like sounds through it all. 

I’m running the built in mic in a separate channel too as back up. I imported in premiere to isolate channels and the machine like sounds are in both shotgun channels and built in mic channels. Anyone have an idea of what’s going on here? Is my camera suddenly just working louder? I didn’t think it was, but curious what y’all think? I shoot run and gun doc and will be shooting all this week so any solutions would be greatly appreciated. 

2 REPLIES 2

AtticusLake
Rising Star

You havent said where the mic is.  Is it on the camera?  If the fan is on, a sensitive mic will hear it, if the ambience is quiet.  The built-in mics certainly will.

You can set the fan to turn off when shooting; this is what I do.  See the spanner menu (System Setup).

OTOH, if you're getting electronic interference in your sound, then that's something I haven't had.  Maybe the camera has a fault; I would say check your cables etc, but you've already said this happens with the built-ins too.

Here's a clip I shot with fan off, in a pretty quiet setting.  The mics are two Clippy EM172s on a bar on the hot shoe.  https://drive.google.com/file/d/1S-RxKP7eCLuVBu8UoypnsqBl-Hk_QhHc/view?usp=sharing

ghpictures
Apprentice

I noticed a similar issue. A very light clicking that was not related to autofocus. Mine stemmed from my Canon 24-105 lens's stabilization setting. Once I turned that off, the sound went away. Unfortunately, I did not hear it when shooting outdoors, and audio in quieter environments was unusable.

Announcements

03/30/2023: New firmware updates are available.

EOS R3 - Version 1.4.0

EOS R5 - Version 1.8.1

EOS 1DX Mark III- Version 1.7.1

Speedlite EL-1 - Version 1.0.2

03/30/2023: Product Advisory for EF50 F1.2 L USM

03/30/2023: Product Advisory for EOS R10


03/28/2023: New firmware version 1.0.3.1 is available for EOS-R5 C
03/14/2023: New firmware version 1.8.1 is available for EOS R6
02/24/2023: We've updated Share Your Photos

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.