03-28-2023 08:49 PM - last edited on 03-30-2023 09:28 AM by Danny
Hi, I'm printing with the prograf-300 pro. In photoshop I set my canvas size to 8x10. My paper is set to 8.5x11. I put a border on the canvas so I could see exactly where to cut my image at 8x10. For some reason every time I print it is coming out at roughly 8 1/8 by 10 1/8. I know that isn't all that much but when I have that border on it to cut it down for frame and it comes out too big it's really turning into a pain! I've tried printing from photoshop and lightroom with same results. From lightroom I even set the "cell size" to 8x10 and it still printed too large. Any ideas what I can do to fix this?
03-30-2023 01:39 PM
There are a few things that could be causing this issue and we would need more information.
I recommended reaching out to our support team so we can troubleshoot this issue in real time. You will need to register your Canon gear HERE to access additional support options.
We look forward to hearing from you.
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 184.108.40.206
PowerShot SX420 IS - Version 220.127.116.11
PowerShot 620 HS - Version 18.104.22.168
PowerShot SX720 HS - Version 22.214.171.124
PowerShot G1X Mark III - Version 126.96.36.199
PowerShot G7X Mark II - Version 188.8.131.52
PowerShot G9X Mark II - Version 184.108.40.206
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.