cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Update Firmware for Panorama Prints on imagePROGRAF-PRO1000

phildeman
Contributor

I know the imagePROGRAF-PRO1000 does not come equiped with a rolling mechanism for roll paper.  And I know that printer doesn't support prints larger than 17"x25?".  However, it would be great if Canon updates the firmware for the imagePROGRAF-PRO1000 to support panoramas.  I can cut the paper to the desired size.  I just need to print a panorama size of my choice.

 

This is a very good printer, but it needs to be able to print panoramas.  Please update the firmware to support panorama printing.

20 REPLIES 20

I feed it through the rear feeder for thicker papers, and the top feeder for thinner.  The easiest way to keep the paper from bending is to unfold it and lightly hold it from the top when it starts feeding.  Once the printer grabs it and starts advancing, you're pretty much good to go, although I usually like to see it 1/4 of the way into the printer before letting go.

Avatar
Announcements