12-26-2020 12:22 PM
12-27-2020 09:59 AM - edited 12-27-2020 10:01 AM
welcome to the forum.
When you say you did all the cleaning operations, did you also do a nozzle check? Is that what is coming out blank?
Try reseating the print head.
Canon Knowledge Base - Reinstall the Print Head - PIXMA PRO-10, PRO-100
12-27-2020 10:49 AM
Thanks for responding.
I have tried reseating the Print Head, but to no effect. I'm not sure what you mean by 'a nozzle check.' By 'all the cleaning operations' I mean all four possibilities from within the print utility - cleaning, deep cleaning, roller cleaning, etc. The nozzles themselves 'look' pristine when I have the print head removed (for reseating). Also, for the record, all the ink cartridges are at least half full.
Note: the issue appeared 'all of a sudden' - one day I'm printing crisp images on art/note cards, and the next day when I turn on the printer, nothiing but blank pages.
12-27-2020 12:35 PM
Probably a long shot, but it would determine if its a printer hardware problem or a problem sending data to printer.
12-27-2020 01:04 PM
I missed that. I'm on a Mac, and the Print Utility presents somewhat differently. See below. Once I know to look, the drop down shows 'Test Print' and selecting that reveals the 'Nozzle Check.'
But even when I run this check, I still get a blank page. So something fundamental with the Print Head seems out of whack.
Tx.
09-08-2021 02:16 PM
Has anyone found a solution to this yet? I am having the same issue. I have updated my firmware and drivers, cleaned everything and still printing blank pages.. HELP!
09-08-2021 05:37 PM
The ultimate solution for me, after phone consultation with Canon Support, was that the print head was dead, caput. The only cost-effective option was to replace the printer. And, since the Pro-100 is out of production, I wound up with a Pro-200.
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.