cancel
Showing results for 
Search instead for 
Did you mean: 

Printing differences between Lightroom and Print Studio

nvw
Enthusiast

Hello,

 

I was trying to print a borderless 8x10 using Canon 8x10 Semi Gloss. In Lightroom I tried every possible combination of print templates, margin settings and anything else I could think of with no success, I always got a small border. I tried printing in Print Studio and it printed perfectly first time. Does anyone know what Print Studio does by default that Lightroom does not?

 

Thanks.

1 ACCEPTED SOLUTION

Hi. I'll try and help. Have you selected the paper this way in the printer driver?

 

Screen Shot 2018-04-17 at 6.01.58 AM.png

 

Do you have the IJ series driver installed or does it say BonJour. If it says Bonjour go back to Printers & Scanners, select "+" and wait for the IJ series version to appear. It could take a few minutes.

John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, Pixma TR8620a, LR Classic

View solution in original post

4 REPLIES 4

jrhoffman75
Legend

what operating system?

John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, Pixma TR8620a, LR Classic

I'm on a Mac using the latest version of Lightroom.

Hi. I'll try and help. Have you selected the paper this way in the printer driver?

 

Screen Shot 2018-04-17 at 6.01.58 AM.png

 

Do you have the IJ series driver installed or does it say BonJour. If it says Bonjour go back to Printers & Scanners, select "+" and wait for the IJ series version to appear. It could take a few minutes.

John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, Pixma TR8620a, LR Classic

Hi John,

 

That was the problem. I thought that selecting 8x10 Borderless under Paper Handling would take care of the sizing even though the I could tell that the margin settings in Lightroom were not what I would expect for 8x10. After setting the Page Setup to 8x10 Borderless, I could then modify the Cell Size in Lightroom to be 8x10 and set the margins to 0in.

 

Thanks for pointing this out.

 

Michael

 

Announcements
09/19/2022: New firmware version 1.0.4.1 is available for EOS C70
08/31/2022: New firmware version 1.1.1 is available forRF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!