cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Printing 13" x 38" paper using manual feed slot on PRO 300 printer

Mike-PDX
Apprentice

I've had this printer for 1.5 years and have been successfully printing up to 13 x 19 prints using Lightroom 11 and 12 on a Windows 10 workstation.  I now have a need to print panorama images (12" x 36") on 13 x 38 Red River paper.

I believe I am correctly setting the paper into the manual feed slot, and I am able to print 13 x 19 through the manual feeder, but when I attempt to feed 13 x 38 paper, the printer tries to print, then ejects the entire page and gives an error - "Support Code 1300 Paper is jammed."  There is clearly no paper jam.   I used the custom paper size option on the printer, and have set up the page size appropriately in Lightroom and Win10.  What am I doing wrong? 

Mike-PDX

2 REPLIES 2

jrhoffman75
Legend

Does your paper type fall into these requirements?

Canon Knowledge Base - Supported Media Types - PRO-300

My Pro-100 has this setting. Does your printer have the same option?

Screenshot 2022-10-24 195122.jpg

John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, Pixma TR8620a, LR Classic

Thanks for your response.  In answer to your first question, the Red River paper seems to fit well within Canon's requirements:  satin finish, measures exactly 13" x 38", weight 68 lb, thickness 10.4mil, and the edges are true and square.

As for your second question, it appears than the PRO 300 menu is a bit different.  Here is a screen shot of my settings.  And maybe I got it wrong when I assumed that a check means disable the width mismatch detection.

Screenshot Pro 300 Custom Settings.jpg

Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.