03-29-2022 06:16 PM
Pixma Pro 9000 Mark 11 wont print, Nothing happens, yellow light flashes 10 times. I have cleaned the print head throughly, replaced all ink cartridges, when you turn on the printer nothing happens. No noise, no print head movement, nothing. The yellow and green lights flash 10 times, pause and repeat over and over.
Any help would be appreciated.
Thank you,
Paul
03-30-2022 07:04 AM
https://support.usa.canon.com/kb/index?page=content&id=ART114110
03-30-2022 11:40 PM
Thank you for your response. I appreciate your help very much. I have zero knowledge of how to operate this printer.
The document link you sent says error 10 is a front printer tray issue. I opened the tray and started the printer. Still 10 blinking yellow.
Where can I find information on how to operate the printer? Do you have any other advise concerning this error 10 flashing yellow?
thank you in advance for your response.
Paul
248-760-6960
03-30-2022 08:25 AM
Pleased to see your issue as I think I have the same problem, I am also confused and in need of light on this same issue.
03-31-2022 06:23 AM
Support | Support - Professional Inkjet Printers | PIXMA Pro9000 Mark II | Canon USA
Manuals can be gotten here.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.