03-22-2022 07:04 PM
I have loved and not had any problems with my Pixma Pro 9000 Mark II for many years - now I am having issues with one of the ink cartridge lights - when I put in the cartridge the ink light looks okay but when I then close the top and try to print I get the error message that one of the ink lights is off - when I open it again that cartridge light is flashing - any suggestions - happening repeatedly
03-30-2022 03:04 PM
Please open the cover to your printer to look at the ink tanks.
Please make sure that you are using genuine Canon ink tanks. Also, please make sure that all of the tape / cellophane has been removed.
From left to right, the ink tanks should be installed as follows:
CLI-8 Photo Magenta
CLI-8 Photo Cyan
If you are not using Canon inks or not using CLI-8 ink tanks, this issue will occur.
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 18.104.22.168
PowerShot SX420 IS - Version 22.214.171.124
PowerShot 620 HS - Version 126.96.36.199
PowerShot SX720 HS - Version 188.8.131.52
PowerShot G1X Mark III - Version 184.108.40.206
PowerShot G7X Mark II - Version 220.127.116.11
PowerShot G9X Mark II - Version 18.104.22.168
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.