06-21-2018 11:21 PM
Hi guys. I just got the PIXMA PRO-100 and did a few letter sized and A3+ prints, and the latter is VERY smudgy !!!
For example, this is a letter size photo that came out fine: https://i.imgur.com/4IaxPa7.jpg?1
This is the same picture printed on a3+ paper that came with the printer: https://i.imgur.com/MrBDcgP.jpg?1
Here is a comparison of both prints together: https://i.imgur.com/G0atmGb.jpg
For both prints, I used Windows 10's image print feature and printed using best quality.
Can someone tell me what I'm doing wrong ?
06-22-2018 05:51 AM
It might be that you’ve printed on the wrong side of the A3 paper. Wet your finger tip and touch a corner of the paper, the sticky side is the side you want to print on.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.