01-28-2024 12:19 PM - last edited on 01-30-2024 10:00 AM by Danny
Hi Everyone,
I have had this printer for a while, but have been unable to get it to work consistently. I've followed the instructions that I've seen online and in the manual, but still no luck. This is a Windows 11 PC, and I can't get it to scan and send properly. It fails to send. I have tried using a shared folder on my PC and by email.
I have another Canon personal printer that I just use the Canon software to control the scan from the PC and create the PDF. Ideally, that's what I'd like to do, but I'm open to any tips to get this running properly. Thanks!
01-30-2024 10:01 AM
Thanks for joining the conversation, brando90210!
While our forum community members are welcome to chime in, Canon does not provide direct support for imageRUNNER series products. Instead, your dealer will be able to help you! If you don't have a dealer and you're in the United States, please call us at 1-800-OK-CANON (1-800-652-2666) and we will be happy to provide you with the names of dealers in your area.
If you're outside the USA, visit http://global.canon and choose your country or region from the map for local support.
We hope this helps!
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.