cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

imagePROGRAF PRO-2100 Cannot rotate image in Canon utility

mstratil
Enthusiast

I own a Image Prograf 2100 printer and I often print photos to 17.62" x 23.5" to 24" rolls. In the past I have been able to select, in the Canon printer utility, the option on the left side that automatically rotates the photo so that it prints longways from top to bottom, such that the 23.5" dimension is printed completely without being cutoff. Recently this option does not appear when I try to print. You can see this in the images I have uploaded. Thus, the option labeled "Rotate page 90 degrees" is grayed out in the first image from the setup menu. Going on to the second image, you can see the two blue options with R in the middle in the final screen that appears during printing. Then, just to the left of the blue boxes is the option I have always used, but it is grayed out. I have searched extensively to try to figure out why it is now grayed out, but to no avail.

Can someone help me straighten out this problem?
Mike

Canon 2100.jpgcanon 2100_2.jpg

4 REPLIES 4

Greetings,

Do you have duplicate instances of the same printer installed?

shadowsports_0-1670191816755.png

What version and build of windows are you running?

What version of the printer drivers are you running?

~Rick
Bay Area - CA


~R5 C (1.0.2.1) ~RF Trinity, ~RF 100~400, +Canon Control Ring

~6D2 (v1.1.1) Retiring ~EF Trinity, others ~DxO PhotoLab Elite ~Windows10/11 Pro ~EVGA RTX 3080Ti FTW3 Ultra ~ImageClass MF644Cdw ~Pixel6 ~CarePaks Are Worth It

mstratil
Enthusiast

Thanks for your suggestions. I have decided to remove my previous installations of the printer and reinstall. I think I might have had multiple installations but it was hard to tell due to the way they were listed.

But I have run into a problem: although I have downloaded the latest driver, but I cannot figure out/find the so-called driver installation program. There is one listed for mac, but nothing for Windows. Can you help me with this?

Is that what you have downloaded?

Screenshot 2022-12-07 195158.jpg

John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, Pixma TR8620a, LR Classic

I typed in a message to you, but it got lost when I tried to send it. Very very very frustrating.

Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.