06-29-2024 05:21 PM - last edited on 07-09-2024 12:39 PM by James_C
what are recommendations if a printer will go unused for 3 months?
06-29-2024 05:24 PM
Hi!
To have a better understanding of your issue, please let everyone know the model of the printer you have.
If this is a time-sensitive matter, please check out your other support options here.
Thanks!
07-01-2024 02:57 PM
07-09-2024 12:35 PM
Hi mariakyriacou,
We have several imagePROGRAF printers in the office and we rarely print. We usually turn them on in the morning and off 8 hours later, Monday through Friday. However, if you plan on storing the printer for 3 months, I recommend you perform the transport outdoors maintenance procedure. Click HERE for the steps (the steps are the same for your imagePROGRAF GP-2000). I hope this is helpful.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.