Showing results for 
Show  only  | Search instead for 
Did you mean: 

Remove print jobs from "Accounting" page on iPF8400S



We're about to clean up the testpages from our Accounting page of our iFP8400S plotter. Found in imagePROGRAPH Status Monitor Accounting tab. We only would like to have the actual prints that need to be billed. We removed the jobs from the plotter's hard drive (on the actual machine under stored jobs -> 00 or something. There's a way to erase the entire hard drive that we don't want either.

Now is there a way to remove certain jobs that kinda "stuck" in the Accounting and not visible anywhere else without erasing everything? Right click only shows details, and ink usage etc.

This article describes how to save, but not how to erase certain lines.



Product Expert
Product Expert


If the jobs cannot be cleared out manually, they should eventually be able to be removed over time when other print jobs build up/clear in the queue.  To see if there are any other alternatives, please contact our support group at 1-800-423-2366.

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Hi and thanks for your answer. That is unfortunate. So learning from it if we don't want test pages to show up there at all, can we just unplug the network cable, connect with USB, print the test page, remove the test page from the job list? Will it show up in Accounting if we do this?


03/30/2023: New firmware updates are available.

EOS R3 - Version 1.4.0

EOS R5 - Version 1.8.1

EOS 1DX Mark III- Version 1.7.1

Speedlite EL-1 - Version 1.0.2

03/30/2023: Product Advisory for EF50 F1.2 L USM

03/30/2023: Product Advisory for EOS R10

03/28/2023: New firmware version is available for EOS-R5 C
03/14/2023: New firmware version 1.8.1 is available for EOS R6
02/24/2023: We've updated Share Your Photos

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version is available for EOS-C500 Mark II
05/26/2022: New firmware version is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
03/23/2022: New firmware version is available for EOS-C70
02/09/2022: Share Your Photos is back!
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.