10-10-2020 02:43 PM
My Canon-4000 PBK ink keeps running out immediately after loading in a new ink cartridge. The printer makes a gurgling noise after loading the new cartridge like the ink is going somewhere and draining from the cartridge. Then, next time I go to print something I get a message that the ink tank is empty. I loaded in two 160mL Canon PFI-1100 Photo Black Pigment Ink Tank cartridges and have experienced this back-to-back. When I run a test print page, all the ink tanks are printing. When I run a print job, the printer stops printing the job due to the PBK Ink showing empty. When I inspect the cartridge and shake it, it appears to be empty although full when I loaded them into the printer. Please help me understand what could be happening and suggestions on ways to resolve.
07-07-2021 04:37 AM
05-04-2022 10:55 AM
Think about it logically, how on earth can a software update repair a leaking sub tank, I don’t understand why people reply with bs just to sound like they know what they are talking about, all their doing is giving people a false hope, it’s a consumable part that can only be replaced, not reliably repaired, and no software update with fix a broken seal
05-04-2022 10:50 AM
Sorry, but I don’t believe your issue was a leaky sub tank, a software update will not repair a leaking sub tank, it can’t be fixed, only replaced.
03-26-2022 11:33 AM
I updated the firmware, but now I suspect that I have (2) 700ml ink cartridges of ink pooling in that area. How did you get to that section in the printer?
08-16-2024 09:01 AM
Anyone have a fix?
08-16-2024 11:02 AM
Hello, the issue is with the grommet / valve on the underside of the sub ink tanks, gets weakened after the many cycles of use, causes a tiny hole which air gets in and allows ink to leak out, air goes into the cartridges so their not vacuum sealed which is why when you put a new cartridge in it empties in days “if your lucky” it’s a part that should cost pennies to fix I’ll attach pics of the culprit, either buy a wrecked machine and strip for grommets, or my solution I built an automatic ciss bulk ink system bypassing the factory sub ink system
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.