05-05-2014 06:11 PM
I have a Pixma MX700 set up for wireless use over my network. Currently it is printing properly and I can scan from the computer (so the printer is definitely being seen by the network), BUT even after setting up the Canon IJ Network Scanner Selector to scan images from the operation panel, the operation panel will not actually scan anything. Instead it displays the "processing, please wait" screen on the printer panel before returning to the scan screen on the printer panel.
My MP Navigator EX 1.0 is seeing the networked printer.
My operating system is OS X Mavericks, my router is an Airport Extreme.
While I can scan, it would be VERY helpful to scan using the operation panel on the printer instead of having to go back and forth between computer and printer.
Any help would be most appreciated. Thanks!
03/18/2025: New firmware updates are available.
EOS R5 Mark II - Version 1.0.3
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.