cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Starlink issue

annieme
Apprentice

Just got Starlink internet. Changed settings in printer to Starlink. Tried printing and it takes a long time for the print job to go to the printer. Once it even timed out. Did not have that issue with my old internet provider. How do I fix this?

3 REPLIES 3

Greetings,

Your internet provider does not have any impact on printing.  You are printing from your computer to a local device.  You do not need internet connectivity to print.  If your StarLink were to be down due to weather for example, you could still print.

For us to try and help, we will need to know the following:

The model of your printer?

The OS you are using it with (version and build)?

What is the printer connected to and how?

I've been waiting for StarLink for over 2 years.  I want to use it on our boat.  We've used Wi-Line in the past, but the tower we are pointing to has been taken over by several TV and radio stations whose signals have degraded the ISP's Wi-Fi broadcast to dismal performance.  If you answer the questions above, I'm sure we can provide some pointers.

 

   

 

~Rick
Bay Area - CA


~R5 C (1.0.2.1) ~RF Trinity, ~RF 100~400, +Canon Control Ring

~6D2 (v1.1.1) Retiring ~EF Trinity, others ~DxO PhotoLab Elite ~Windows10/11 Pro ~EVGA RTX 3080Ti FTW3 Ultra ~ImageClass MF644Cdw ~Pixel6 ~CarePaks Are Worth It

Not sure what the issue was but it is working fine now. Thanks.

My printer is setup for wifi so I can print wirelessly. Sometimes it works and sometimes not. When it doesn't work, I get the message that the printer is off line. If I turn the printer off and then back on it works. Now I just tried to scan something wirelessly and it did not work. Kept getting error messages. I finally had to use a USB drive to scan the document to the USB drive and then connect to my laptop. Would updating the drivers help?

Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.