cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Pixma G6020 Unable to Print Over LAN in Apartment Complex

thackeryw
Apprentice

About to return new Pixma G6020; I don't want to be told it is past return date.  Unable to print wirelessly over LAN.  Live in large apartment complex; Spectrum provides wifi as part of rent. Able to connect computer, phones, TVs, etc. easily but not Pixma G6020.  Canon software appears to recognize network and existence of printer but fails to connect on last step.  Was hopeful when I saw this screen, but it failed to connect.  I can print sporadically with wife direct from a single computer, unable to set it up for two computers and two phones.Printer setup screen.png

5 REPLIES 5

jrhoffman75
Legend

Since it is new go to canon support site, register your product and request support.

John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, Pixma TR8620a, LR Classic

Alas, your product registration process is as bad as printer LAN connectivity process.  I am unable to register my printer because Canon won't accept password.  Obviously, when I can get in to the Canon community as I am posting this but there is no obvious way to get to product registration from the community.  When I ask for a new password, I get "Error in processing".  

And when I try to register the product without logging in, the process fails, producing the error "ERROR for site owner:  Invalid domain for site key"  with reCAPCHA symbol halfway off the screen.

And, of course, telephone support only works when you have registered the product.  Very clever.

Community and support are different. When you are on support site create a new account.

John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, Pixma TR8620a, LR Classic
Announcements
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
10/14/2022: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
09/19/2022: New firmware version 1.0.4.1 is available for EOS C70
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!