12-01-2022 08:17 PM
I have a Maxify MB5170 setup to print over LAN that's accessible by three PCs. Has been working fine for a few years and all of a sudden it stopped working. Each time I send a document to the queue, status window shows "Creating Print Data" and nothing happens afterwards. I have tried removing the drivers, reinstalling fresh drivers, printer detection over LAN successful but keeps failing the test print. Subsequent prints post installation expectedly keeps failing too.
Printer works perfectly when connected to PC via USB cable. All the other PCs are also unable to print via LAN. All ink tanks are full. PC (Windows 7) appears to have no trouble communicating with the printer over LAN network.
12-01-2022 08:32 PM
We appreciate your participation, though we need to let you know that your product appears to be a model that is not supported by our team here at Canon USA. While the community is welcome to chime in, the Canon Community Forum is hosted and moderated within the United States by Canon USA. We are only able to provide support for Canon products manufactured for and used within the US market.
If you live outside the United States, please click HERE and select your country to find support in your part of the world.
12-02-2022 08:58 AM
With the printer and computer connected to the same network, perform the following troubleshooting steps.
Can you ping the printer's IP address?
Does the printer's webserver display in a browser when its IP is entered?
Do you have and 3rd party Anti-Virus, Security or firewall software installed. If so, try disabling it temporarily.
Bay Area - CA
~R5 C (184.108.40.206) ~RF Trinity, ~RF 100~400, ~RF 100~500, +RF 1.4x TC, +Canon Control Ring, BG-R10~6D2 (v1.1.1) Retired ~EF Trinity, others ~DxO PhotoLab Elite ~Windows10/11 Pro ~EVGA RTX 3080Ti FTW3 Ultra ~ImageClass MF644Cdw ~Pixel6 ~CarePaks Are Worth It
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 220.127.116.11
PowerShot SX420 IS - Version 18.104.22.168
PowerShot 620 HS - Version 22.214.171.124
PowerShot SX720 HS - Version 126.96.36.199
PowerShot G1X Mark III - Version 188.8.131.52
PowerShot G7X Mark II - Version 184.108.40.206
PowerShot G9X Mark II - Version 220.127.116.11
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.