05-12-2019 07:54 PM
Recently I changed my internet provider to Cox and started using their Panoramic Wifi router. The printer MX922 is now not locating the network. Are they compatible?
05-13-2019 09:35 AM
Yes. Compatible with the 2.4Ghz broadcast.
Bay Area - CA
~R5 C (184.108.40.206) ~RF Trinity, ~RF 100~400, ~RF 100~500, +RF 1.4x TC, +Canon Control Ring, BG-R10~6D2 (v1.1.1) Retired ~EF Trinity, others ~DxO PhotoLab Elite ~Windows10/11 Pro ~EVGA RTX 3080Ti FTW3 Ultra ~ImageClass MF644Cdw ~Pixel6 ~CarePaks Are Worth It
05-14-2019 06:00 AM
As long as the 2.4GHz network is enabled the printer should be able to communicate with the printer. To troubleshoot this issue, I recommend resetting the printer's network card and connecting the printer to the network via Standard Setup. The following steps will assist you:
Resetting the Network Card
Now that the network card has been reset, the following steps will guide you through connecting the printer to the network via Standard Setup:
Note: Your networks name and password will be needed to complete these steps.
04-02-2020 03:49 PM
So happy I found you. Your directions were excellent and easy to follow. I especially liked the click five times instructions. I am an older user, so this was amazingly helpful and now I can print again! I didn't know that when I moved and changed internet providers I would need to reset my printer. Duh. Anyway, thank you for your most excellent tutorial.
11-25-2020 02:54 PM
I performed all of your steps and it's still not working.
12-18-2020 01:07 PM
If there is a WPS button on your router, please try using the WPS push button method to connect your PIXMA MX922:
Please note, some routers have WPS disabled by default. If the above method fails, please log into your router's web interface to enable WPS. Your internet service provider can assist you with this.
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 220.127.116.11
PowerShot SX420 IS - Version 18.104.22.168
PowerShot 620 HS - Version 22.214.171.124
PowerShot SX720 HS - Version 126.96.36.199
PowerShot G1X Mark III - Version 188.8.131.52
PowerShot G7X Mark II - Version 184.108.40.206
PowerShot G9X Mark II - Version 220.127.116.11
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.