cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

shutter release not working S100

sandysorlien
Apprentice

Hello,

I am suddenly having problems with my S100. It will not take the picture when I press the shutter release. In case I had accidentally changed something, I did a Reset to Defaults. Then it worked, briefly, before returning to not working. It also would not let me change My Colors.  Everything else seems to be working fine.  Any ideas?

575 REPLIES 575

Congratulations. Mine does not.

 

Don't feed the trolls.

 

Since my last post I've put the S100 back in it's box and bought another camera. I'd still like to know why it would go so drastically wrong only 18 months into it's life though.

While it is very unfortunate that you all have had problems with your S100s I was trying to point out that it is not a universal occurance. There are many thousands of these cameras out there whose owners are completely happy with them.

Yeah, I was completely happy with the S100 too. Until it stopped working completely and found this forum that made me realise it is a common problem that any time soon can happen to anyone, including you.

Regarding the comment made by Gary S., point well taken that most s100 cameras may be trouble free and the camera takes great pictures.  But a problem is a problem, even if it affects only a fraction of the users.  Our camera is a lemon.  First it had the lens retract issue that Canon acknowledged and fixed for free.  Now this second problem that required repair by Canon.  In the age of Six Sigma, Canon should be stepping-up.  Their response is unimpressive, suggesting that they either do not know how to fix the problem or just do not care.

Gary S, simply a troll! Hope you camare never fails!

And CANON it is time you accept there is problem with SOME ( to make the troll happy) of the S100

Yes. Just because only a fraction of  S100 owners are experiencing this problem,  that does not invalidate their concerns. It is not a cheap camera and these problems should not occur with any of them, no matter if it is 10, 100, or 1,000 cameras.

sedphx
Apprentice

I'll be testing this out later today, but I may have found a solution to the issue (at least in the case of my s100).

 

Menu > Shooting Settings > Blink Detection - OFF

 

Geez I hope it's something as stupid and simple as this.

 

Hi sedphx

 

where did you get this info from?

I had Blink Detection disabled on my S100 when the problems appeared.
I set to to ON and tried it, then back to OFF and tried it. But problem persists in both modes

Thanks for you input though

 

 

 

 

 

I just stumbled across it going through my menu settings.  It was on (perhaps by default?) and I changed it to OFF.  It does seem to have helped in my case.  I just returned from a few hours at the Acropolis in Athens and for the most part my S100 was snapping away.  I was shooting mostly in P mode -- that seemed to work best.  In Av mode at 2.0-2.8 it was very laggy again.  I only shot jpeg -- didn't think to try shooting from RAW frames.  We'll see.

Announcements
03/14/2023: New firmware version 1.8.1 is available for EOS R6

03/02/2023: New Firmware Updates Are Available:

EOS R7 - Version 1.3.0EOS R10 - Version 1.3.0
02/24/2023: We've updated Share Your Photos

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.