01-22-2013 02:17 PM
Hello,
I am suddenly having problems with my S100. It will not take the picture when I press the shutter release. In case I had accidentally changed something, I did a Reset to Defaults. Then it worked, briefly, before returning to not working. It also would not let me change My Colors. Everything else seems to be working fine. Any ideas?
11-11-2014 05:47 PM
I too have this problem.
Serial: 41203201xxxx
11-11-2014 08:37 PM - edited 11-11-2014 08:38 PM
Mike, I agree with you in so many ways. I posted a reccomendation to this forum to start an online petition to insist that Canon recall the issue. It appears my post was intercepted or I overlooked it. -Nik
11-11-2014 09:06 PM
nikfrom80s, your post was there this afternoon, then apparently was deleted by someone.
11-11-2014 09:10 PM
11-10-2014 08:01 AM
11-10-2014 08:47 PM
Mine serial number;
452032003579
Unfortunately i now live outside of USA & cannot approach BBB either 😞
It seems that canon has not issued any official response at all on this forum thread...very shocking for a reputed brand name.
11-11-2014 09:14 AM
11-10-2014 09:39 PM
My S100 serial# is 452032019059.
11-11-2014 09:29 PM
11-10-2014 07:58 AM
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.