04-17-2016 12:36 PM - edited 04-17-2016 12:51 PM
My SX700 is linked up with the Samsung S3, and the image is showing ready to transfer on the camera. However, as soon as I tell it to transfer, a disconnect message comes up on both and camera says " transfer failed." Any ideas?
Computer, iPad, and IPhone connections work perfectly, so I assume it is an Android problem.
04-19-2016 05:00 PM
Hi BWB,
Thanks for posting!
First, if mobile data has been enabled, please turn it off, then try to connect again.
If you're still unable to connect, please reply with the following information:
04-19-2016 09:48 PM - edited 04-19-2016 09:49 PM
Richard,
Thank you for responding.
I have tried turning data off. It didn't help, unfortunately.
The phone is on Android 4.4.2 on Verizon. I have not been able
to transfer to this phone at all.
Thanks,
BWB
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.