I have a powershot A1400 and it is showing a message on the screen saying "lens error".

[ajwolbert]

My powershot A1400 is displaying "lens error" . It will neither close nor take a picture....any suggestions?  

[smack53]

If the lens is sticking out, turn on the camera and GENTLY try pushing the lens back in while using the zoom button. Give it a slight twist to see if maybe some dirt is causing the lens to get stuck. Just don't use too much force or you'll need a new camera for sure.

Try a reset all as well.

Steve M.

[jrhoffman75]

Before you push anything check if the lens is crooked. Sometimes they get bumped sideways and a push to straighten it can often snap it back. If it's crooked and you push it in more damage could occur. 

If if you are sure it's straight then a push in might solve your issue. 

[ajwolbert]

Thank you.  I just worked on it a few minutes and so far, it is working perfectly again.  

[ajwolbert]

Thank you.  

[cyann]

Same issue, pushed the lens back in place and now lens is working fine but still showing the message.

[cyann]

This worked for me but the message is still showing. Anything else you reccommend?

[cyann]

I pushed it in but im like 99% sure its straight but its still showing the error message.