cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

ELPH 180 no longer connects to Windows 10 computers

mjhuyser
Apprentice

My ELPH 180 no longer connects to Windows 10 computers. I've tried multiple computers and multiple USB cables with no luck. I've gone through all the FAQs and have had no success with them. I realize this problem has been posted before but no solution has been posted which matches what I'm seeing. The computers provide a USB-connected confirmation tone when the camera is plugged in but in less than 3 seconds a USB-disconnected tone rings. I've tried this with Device Manager open and "Portable Devices" appears with the tone and then disappears. The same behavior happens accross all computers and cable configurations - the only constant is the camera itself. It was purchased new in May 2020 so it's a young device. I tried installing Canon CameraWindow but that didn't help either.

3 REPLIES 3

jrhoffman75
Legend

Welcome to the forum.

 

Try resetting camera settings - page 74 of your user manual.

John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, Pixma TR8620a, LR Classic

Thanks for the reply but, sadly, didn't work. Still the same problem.

Give Canon a call at 1-800-OK-CANON

John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, Pixma TR8620a, LR Classic
Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.