07-28-2021 05:08 PM
I recently moved my Canon Pro-4000, after draining the ink and going through the other relocation procedures. I replaced all the ink tanks with fresh 160ml cartridges. After two small prints, the panel is telling me that all my ink tanks are low. Could it possibly have used that much ink just filling up the lines, or do I have a bigger problem. Thanks. My first post.
Tim Hyde
09-22-2021 03:52 PM
Hi hydetim,
After a move process, the imagePROGRAF PRO-4000 will refill the ink lines, which in turn will cause the ink status to show as low. This is normal behavior after performing a move.
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.