10-23-2022 04:21 PM
Operating System Compatibility in Support shows that the printer, imageclass mf4350d, does not support Windows 10s and Windows 11.
Will Cannon support Windows 11 for imageclass mf4350d dirver?
02-08-2023 10:22 PM
I downloaded this driver from Canon India and worked just fine. Canon USA site downloads are not working properly.
07-24-2023 12:02 AM
I tried repeatedly downloading/installing Windows 10 drivers without success. I needed to install in compatibility mode. The link below has the detailed walkthrough:
07-24-2023 12:03 AM
Install in compatibility mode. Complete walkthrough here:
03-03-2024 02:52 PM
I've confirmed the windows 10 driver works in windows 11. MF Toolbox only works for me when I 'Run as administrator'. Otherwise, hangs.
04-27-2024 11:59 AM - edited 04-27-2024 12:06 PM
1. Unplug your printer.
2. Go to Canon website and download Windows 10 driver.
3. Go to where the driver is and right click on it chose "properties".
4. Go to "Compatibility" tab and check "Run this program compatibility mode for:" then chose "Windows 7" from the dropdown.
5. Click "Apply" an close the dialog.
6. Run the app but stop on the first page.
7. If you never installed the driver before, continue and you are done.
8. If you installed the printer before then cancel the installation (you have to run it once to unpack its content),
9. Go to where you downloaded the app and you should see a folder created named similar to "MF4350MFDriversV270W64usEN"
10. Go to the folder, inside it into "misc" and run "DelDrv.exe". This fully delete the driver you installed before and restarts your machine.
11. Once your computer restarted, run the installer you downloaded again and you are done.
07-12-2024 05:00 PM
I had no luck until I used the UK driver found at [Windows 64bit] imageCLASS MF4350d/MF4320d MFDrivers (UFR II / FAX / ScanGear)
12-26-2024 06:52 PM
All trying for more than 2 hours on my window 11, I click on this one from UK, it work.
https://in.canon/en/support/0100162101. It work great. All others DON'T WORK.
12-26-2024 06:53 PM
Thank you. You save me. I spent hours without luck, and your work. THANK YOU.
12-26-2024 07:23 PM
You are very welcome!
01-06-2025 04:15 PM
I was able to print, but after printing each page, the said print current size? and also the page that print out does not line up. Any suggestion?
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.