11-02-2020 11:07 AM - last edited on 09-04-2024 01:25 PM by James_C
For the past several months, I have tried setting up my MF644CDW to scan to email. I've followed the instructions to the best of my ability, and read a number of posts on here... and yet, I'm still stuck. Turning to this forum in the hopes someone has cracked the code.
Here's what I've done so far:
Here's what happens when I try to Scan to E-mail:
Did I miss something here? Is there a way to get more information from the printer about what the error actually is - is it an authentication error, something else?
Appreciate any pointers you guys have. Going crazy here...
Solved! Go to Solution.
12-03-2021 07:27 PM
I finally got this issue to work tonight and thought I'd post it for all others that are experiencing the same.
1- If you are using GMail, you have to setup an 'App Password' for your Canon to work.
2- Go to Google.com and click on your picture (upper right hand corner) and select 'Manage Your Google Account'.
3- Click on 'Security on the left hand side'.
4- Scroll down to section that says 'Signing in to Google'.
5- Make sure '2-Step Verification' is setup. If it is not, add 2-step verification now.
6- Click on 'App Passwords' to setup a password for your Canon. You may have to sign into your Google account again.
7- Under the 'Select App' down arrow, select 'Other (custom)'
8- Enter a name for your Cannon. I put my model number in the field: MF644Cdw
9- Select the 'Generate' button. This will generate a password. Copy/Paste this password or write it down.
10- Find your Cannon's IP Address. I selected 'Status Monitor' on my Cannon; then selected 'Network Information'; then selected 'IPv4'; take down the numbers listed under 'IP Address'.
11- Open up Chrome and enter the IP Address from step 10.
12- Select 'System Manager Mode' option and select 'Log In'. If you have setup a 'System Manager ID' and 'System Manager PIN', enter that information and then select 'Log In'.
13- Select 'Settings/Registration' button on the right hand side.
14- Select 'TX Settings' on the left hand side.
15- Select 'E-mail/I-Fax Settings'.
16- Select 'Edit' button on the upper right hand side.
17- SMTP server = smtp.gmail.com
18- Email Address = [enter your email address]
19- Check mark 'Use SMTP Authentication (SMTP AUTH)'
20- User Name = [enter your email address]
21- Check mark 'Set/Change Password'
22- Password = [enter the password generated from step 9 above]
23- Check mark 'Use TLS for SMTP'
24- Check mark 'Verify Certificate'
25- Check mark 'Add CN to Verification Items'
26- Check mark 'Use TLS for POP'
27- Check mark 'Verify Certificate'
28- Check mark 'Add CN to Verification Items'
29- Scroll up to the top of the page and select the 'OK' button to save these settings.
30- Select 'Network Settings' on left hand side.
31- Select 'Port Number Settings'
32- Select 'Edit' button in upper right hand side.
33- Change 'SMTP' field to = 465
34- Scroll up to the top of the page and select the 'OK' button to save these settings.
35- Select 'To Portal' link in the upper right hand corner.
36- Select 'Address Book' button on right hand side.
37- Click on '01' link and select 'Edit' button. Add your email as the first email address.
38- SCroll up to the top of the page and select the 'OK' button to save these settings.
39- Go to your Cannon and test the Scan to Email function.
40- Check email to see if you received the email. If you didn't get email, check 'Status Monitor/Cancel' button under the 'TX Job Log' section for Error Code specifics.
03-16-2024 10:20 AM
Thanks for joining the conversation, jlap777! It sounds like you've got both a different printer and a different error message than what this thread is about. If you need help, we recommend starting a new thread dedicated to your issue. To do that, just click HERE.
08-17-2024 07:26 AM
I have a MF733CDW and used to use Gmail to send scans but it stopped months ago. I tried using the fix above but got stuck at this step. There is no "Select App" or "App password' section anywhere in my Google acct that I can find. What am I missing?
- Click on 'App Passwords' to setup a password for your Canon. You may have to sign into your Google account again. 7- Under the 'Select App' down arrow, select 'Other (custom)'
09-04-2024 12:41 PM
Hello. This had worked for me in the past. However, it scan to email has recently stopped working. I have tried creating a new password on google. I have used lower case, upper case, spaces, and no spaces for the password, but it is still not working. I also switched the port from 465 to 587, and changed it back, but i am still getting the #802 error code. Does anyone have a solution to this if all instructions have been followed? Thank you.
10-08-2024 05:51 PM
Starting in Fall of 2024, Google Workspace accounts will no longer support less secure apps, third-party apps or devices that ask you to sign in to your Google Account using only your username and password. For exact dates, visit Google Workspace Updates. To access apps, you must use OAuth. To prepare for this change, review the details in Transition from less secure apps to OAuth.
10-06-2024 01:13 PM
It was working for me within August but not working anymore with the same settings. Firmware updated, but nothing improved. Any news?
10-08-2024 05:54 PM
According to Google, they are no longer allowing third party apps that send password information. You can read more at the links included in the following:
Starting in Fall of 2024, Google Workspace accounts will no longer support less secure apps, third-party apps or devices that ask you to sign in to your Google Account using only your username and password. For exact dates, visit Google Workspace Updates. To access apps, you must use OAuth. To prepare for this change, review the details in Transition from less secure apps to OAuth.
10-06-2024 02:04 PM - edited 10-06-2024 02:09 PM
What error are you getting? Unless changed, the default behavior prints a transmission failure report if send fails..
I'm using port 587 and Gmail with an app password. I just tested. Working fine.
~Rick
Bay Area - CA
~R5 C (1.0.7.1) ~RF Trinity, ~RF 100 Macro, ~RF 100~400, ~RF 100~500, ~RF 200-800 +RF 1.4x TC, BG-R10, 430EX III-RT ~DxO PhotoLab Elite ~DaVinci Resolve Studio ~ImageClass MF644Cdw/MF656Cdw ~Pixel 8 ~CarePaks Are Worth It
10-14-2024 07:38 AM
Hello, this has all recently stopped working. It was working in September but not in October.
I am using app password and re-checked all the settings.
Still ERROR ( 802 it seems according to the report)
Google says it is allowing app password, not sure what the problem is. We dont have to use Oauth.
What do we do with out existing Canon MF devices?
10-14-2024 09:29 AM
I used to use my Comcast email account to 'Scan to email' but it stopped working about 2 years ago. I switched to Gmail but it also stopped about a year ago like everyone else. To block spam I believe that these large providers have permanently blocked these ports and made the old solutions useless.
MY SOLUTION: I pay for a hosted domain that I use for hobbies, photos, blog, etc. I configured one of the built in email accounts for scan to email and it works perfectly and reliably. My advice is get your own real domain.
10-14-2024 10:25 AM - edited 10-14-2024 10:28 AM
Greetings ,
My experience has been different than yours. I've used Comcast and Gmail successfully. I'm still using Gmail today. Comcast requires that you use the account regularly, otherwise they disable your ability to use SMTP relay. You have to log into the account periodically to keep it active which I don't do.
Gmail is much more forgiving. I've been using it for about 3 years. Recently with both printers I own. To use Google, you have to use an app password. My Scan to email has been 100% reliable. I'm sure a hobby domain would work fine as well.
~Rick
Bay Area - CA
~R5 C (1.0.7.1) ~RF Trinity, ~RF 100 Macro, ~RF 100~400, ~RF 100~500, ~RF 200-800 +RF 1.4x TC, BG-R10, 430EX III-RT ~DxO PhotoLab Elite ~DaVinci Resolve Studio ~ImageClass MF644Cdw/MF656Cdw ~Pixel 8 ~CarePaks Are Worth It
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.