06-23-2023
02:58 PM
- last edited on
06-23-2023
03:05 PM
by
Danny
So, when I preview an envelope in the print driver gui settings window (win10 using the generic PCL6 driver stuff) it shows my envelope with text and graphics just fine, but when it prints the stuff near edge of envelope gets clipped by what appears to be about 0.25"-0.30" gutter around the envelope. The PCL6 settings has gutter setting of 0.
Is there an actual setting in the printer admin gui to adjust this apparent gutter?
Model MF455dw
09-21-2023 01:31 PM
Hello,
The MF455 does not support borderless printing so items close to the edge can get cut off. The MF455 would have a 1/4 inch border around the edges of letter and A4 sized paper and would have a 3/8 inch border on envelopes.
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.