ImageCLASS MF445dw printing "GET ?eSCL/ScannerCapabilities HTTP/1.1 Host: localhost" many times a day wasting paper and i cant get it to stop! I have reloaded the software multiple times. Once it did stop until we had a brief power outage and now it is back and will not stop. Using windows 11.
The printer does not store jobs.so the issue could be caused by jobs in your print queue or poor communication between the computer and printer. In this situation, I would suggest contacting support at 1-800-652-2666. Our agents would be happy to help check where the print job is coming from.
The issue could be caused by a driver issue or a problem connecting via USB. In this situation, you can try reinstalling the recommended drivers for the printer using the link found HERE or switching from a USB connection to a network connection for the printer. If that does not resolve the issue, I would suggest contacting support at 1-800-652-2666.
Thanks. The newest download FINALLY took care of the extraneous paper usage. Now since reinstalling the driver, our machine will not fax. It was working fine before. I did notice both previously and currently that the driver seems to replicate one of its functions on the Que. For example, when I first installed it showed a printer and scanner. Now it shows a printer and 2 scanners.
Earlier we could use the printer both with USB connection and wirelessly (though I realize your manual says that is not possible). Now we cannot do both, is there any way to get that capability again?
The MF743 can't use a wireless network connection and an ethernet connection at the same time but, the printer can use wifi and USB at the same time. When you try to use the printer or fax now, do you get an error or what happens? If you get any specific message please let us know and we can assist further.
An NG result for faxes will point to a problem calling the fax number or a problem with the phone line connection. In this situation, You can try checking the fax line on the fax machine to make sure it is properly connected or try sending a fax to a different number to see if it goes through.
If that does not resolve the issue, I would suggest contacting support at 1-800-652-2666. Our agents would be happy to assist with the fax connection and can provide any service options.
07/31/2023: New firmware updates are available.
05/31/2023: New firmware updates are available.
05/18/2023: New firmware updates are available.
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM