cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

imageCLASS MF212w Error code 600104

JumpToTheMoon
Apprentice

I have a Canon ImageClass MF210.  I use the MF Toolbox software on my MacBook Pro (12.5.1) to scan documents.

On several occasions, when I have been scanning documents with multiple pages (3+), inevitably, between pages, I will receive an error message, and the ability to add additional pages stop.  The screen on the printer itself says something like, "remote scanning..." Upon attempting to scan again, I repeatedly receive the Error code 600104 error message. Tonight, I was only able to fix this by turning the printer on and off several times.  

Does anyone have any idea what the problem might be as well as a potential fix?

 

Cannot communicate with the scanner.
The cable may be disconnected, or the scanner may be turned off.
Check the scanner status and try again.
Scanner driver will be terminated.

Error code: 600104

3 REPLIES 3

Stephen
Moderator
Moderator

Hi there!

The imageCLASS MF210 is a series of products. For the Community to provide you with the most accurate information, we'll need to know the exact model of your unit. It's usually on the front or top of the physical printer (not from your computer).

How do you connect to your printer (USB or WiFi)?
Any other details you'd like to give will help the Community better understand your issue.
If you're in the United States and this is an urgent support need, please click HERE to visit your My Canon Account to discover your personalized support options.
If you're outside the USA, please click HERE to find support options in your country.
Thanks and have a great day!

It is the imageCLASS MF212w. I connect via Wi-Fi.

Hello,

If the scan drops after 3 pages and you get a communication error when you try to scan, the issue points to a weak signal or a drop in network communication. In this situation, I would suggest unplugging the router for 5 seconds and then plugging the printer back in. Once the network is back up, you can check if you still have the same issue. If the issue persists, I would suggest moving the printer so it can get a stronger wifi signal from the router.

 

Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.