cancel
Showing results for 
Search instead for 
Did you mean: 

Voltage change Canon MF451 printer

asinghvi
Contributor

I am relocating to India for some time. I want to take my MF451 printer to India. Is there a SMPS inside which will allow 220 volt operation? Is there a jumper inside which can be changed to the required voltage?

1 ACCEPTED SOLUTION

Hello Asinghvi,

Unfortunately, the printer does not have an internal jumper available that can be changed that would allow the printer to change voltages. The printer would only be able to work with AC 120-127 V:5.9 A, 60 Hz and we would not have any options to change the power requirements.

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

 

View solution in original post

6 REPLIES 6

James_C
Moderator
Moderator

Hi asinghvi

Welcome to The Canon Forums!

We appreciate your participation, though we need to let you know that your product appears to be a model that is not supported by our team here at Canon USA. While the community is welcome to chime in, the Canon Community Forum is hosted and moderated within the United States by Canon USA. We are only able to provide support for Canon products manufactured for and used within the US market.

If you live outside the United States, please click HERE and select your country to find support in your part of the world.

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

It is the Imageclass MF451 which is a canon USA product. 

James_C
Moderator
Moderator

Hi asinghvi

We apologize for confusing your product. The imageCLASS MF451dw is a Canon USA product. Concerning your question, the imageCLASS MF451 does not support dual voltages. The imageCLASS MF451 power supports AC 120-127 V:5.9 A, 60 Hz.

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

shadowsports
Elite

The lack of dual voltage support is just the first issue you will experience.  Retailers do not stock inks for your USA based product abroad.  Unless you have someone who will send inks to you, its best to buy a printer sold for use in the country or region where you will reside.  At the end of your visit or residency, you can donate the printer to  school or church.  This is the most cost effective solution in both the short and long term.   

~Rick
Bay Area - CA
~R5C (1.0.1.1) ~Many Lenses ~DxO PhotoLab Elite ~Windows10 Pro ~EVGA RTX 3080Ti FTW3 Ultra
~ImageClass MF644Cdw ~Pixel6 
~6D2 (v1.1.1) retiring

I checked. The toner cartridges are available there. Is there an internal jumper which can be changed to switch voltages? As same printer series is being sold in India rated as 220 v.

Hello Asinghvi,

Unfortunately, the printer does not have an internal jumper available that can be changed that would allow the printer to change voltages. The printer would only be able to work with AC 120-127 V:5.9 A, 60 Hz and we would not have any options to change the power requirements.

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

 

Announcements

08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/30/2022: Service Notice: EOS 70D: Error 70 or Error 80
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!
12/7/2021: New firmware version 1.3.0 is available for Mount Adapter EF-EOS R 0.71x