cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

ScanGear does not offer Feeder as Original Input Method for MF735cx

libove
Contributor

My Canon MF735cx (current firmware, verified two days ago), connected to Windows 10 (64-bit, April 2018 update), using Canon MF Scan Utility v1.5.0.0, MF735cx driver v21.81, when I try to use ScanGear to start a scan from Windows, ScanGear does not offer the Feeder as an option at all. Only the platen glass.

That's obviously wrong, since many posts about many (lower-end) Canon products over the years show ScanGear offering the Feeder option, and one of this MF735cx's most desirable features is it's very high-end double-sided-at-once scanning feeder.

So, what's wrong with ScanGear/ how do we get ScanGear to offer the power of the MF735cx to allow selecting the Feeder (including in either single-sided or double-sided mode) as the Original Input Method?

thank you,

 

1 REPLY 1

dicontto
Apprentice

Hello, where you able to get this function fixed? Thank you!

Announcements