cancel
Showing results for 
Search instead for 
Did you mean: 

Problem with ADF I-sensys MF8280Cw

FabriceB50
Apprentice

Hello,

When I try to scan with ADF, the paper comes off fine but then stops, always in the same place. There is no jammed paper debris.

The error code is 103,0,0.

IMG_20220106_212222.jpg

1 ACCEPTED SOLUTION

FabriceB50
Apprentice

I found the solution. It is the plastic tab (with red arrow) on the glass that is blocking. A small piece of adhesive tape, cut with a cutter and it's good.

View solution in original post

1 REPLY 1

FabriceB50
Apprentice

I found the solution. It is the plastic tab (with red arrow) on the glass that is blocking. A small piece of adhesive tape, cut with a cutter and it's good.

Announcements