05-13-2019 05:34 PM
Hello, would appreciate any help.
I have a MF731Cdw getting vertical black bar when scanning from top feeder, but only on every other copy job. If I copy a 10 page job, no vertical line, but every other copy job, I get a vertical bar like line from top to bottom of page.
This only happens when scanning from the top feeder and only happens every other print job.
I get no lines when scanning from bed or on normal print jobs.
Thanks!
05-16-2019 12:36 PM
Hi diceclip.
Since this issue is only happening with every other copy, there may be another internal issue with printer. Please call us at 1-800-OK-CANON (652-2666), Monday - Friday 10:00 a.m. to 6:30 p.m. ET (excluding holidays). The next steps will need to be provided by phone with a technician assisting you through them.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.