10-29-2023 10:02 AM - last edited on 10-29-2023 10:24 AM by James_C
My MF264dw still has 20% toner left, but it will no longer print.
01-26-2024 02:53 PM
Hello,
If the toner is at 20% you should be able to continue printing. If you are getting a message about replacing the toner, you can try adjusting the setting for displaying the timing for the prepare cartridge message. You can use the steps found in the link HERE to adjust the setting. If that does not resolve the issue, you can try contacting support over the phone at 1-800-652-2666. Our agents would be happy to help. You can also reply to this post with any specific errors that you get on the printer display or your computer screen when you try to print and we can assist further.
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.