cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Imageclass MF743Cdw prints too light. How to get it darker?

Linda_Hagan
Apprentice

My new (bought in October) Imagelcass has yet to print black in full black. It's very light, almost greyscale.  Color prints fine but the black is more of a grey.  I can adjust print settings when making copies, but can't find a way to make it "print" darker.  I use a PC, not a Mac.  Suggestions?

1 ACCEPTED SOLUTION

TEKnightRider
Contributor

How to fix the “lighter looking” / slightly “washed out” printing of a Canon MF740 Series laser printer (Canon Color ImageClass MF743Cdw).

 

I noticed the brand new Canon MF743Cdw was printing what I would call “washed out” Color. Even on Black/Text only prints, it looked almost “Lite-Brown” or like some sort of Lighter Grayscale instead of a “Deep True Black”. It was very noticeable compared to several Canon Color ImageClass MF730 Series / MF733Cdw printers I had previously installed and configured.

 

To fix this…I followed this procedure and now the MF740 Series / MF743Ddw is printing like expected…like a champion with full vibrant Color and great rich deep Blacks when printing either B&W or Color.

 

Three (3) Steps to Great Color & Deep Blacks –

  1. Clean Fixing Assembly -
    Go to the Home Screen  >  Menu  >  Adjustment/Maintenance  >   Maintenance  >  Clean Fixing Assembly  >  Select ‘OK’  >  Then, Select ’Start’ (in the lower righthand corner of the Printer Display, and let it do its thing).
  2. Correct Print Color Mismatch -
    Next, go to the Home Screen  >  Menu  >  Adjustment/Maintenance  >  Adjust Image Quality  >  Correct Print Color Mismatch  >  Select ’Start’ (in the lower righthand corner of the Printer’s Display, and let it do its thing).
  3. Auto Adjust Gradation - Full Adjust - (This is a more robust sequence than the initial Startup Color Adjustment when the printer was first turned ON.)
    Go to the Home Screen  >  Menu  > Adjustment/Maintenance  >  Adjust Image Quality  > Auto Adjust Gradation  >  Full Adjust  > Select ‘OK’ (it will list 4 Steps)…
    1. Print Image 1 for adjustment.
    2. Scan the printed Image 1 for adjustment.
    3. Print Image 2 for adjustment.
    4. Scan the printed Image 2 for adjust.
      Select ’Start’ (in the lower righthand corner of the Printer’s Display, and follow the on screen instructions).

 

This did the trick for me, hope others find it helpful, enjoy! 🙂

View solution in original post

52 REPLIES 52

Cool EnFuego glad you found it and that it helped! Smiley Happy

I'm having the same problem and had huge hope for that earlier protocol, but it didn't help for me. 

 

The printer was working fine, printing at correct density's, then one day it started printing light. If I save my doc onto a USB stick and print from there, then the density is fine. It's only when I print from the computer that it prints light, whether that's airprint or hardwired printing. 

 

So I'm thinking it must be a setting on the computer preferences but I don't see anything for that. I'm on a mac.

 

Can anyone help?

I also followed the instruction here but I don't get black text as dense / thick as with for example a Sharp or HP M479fdw copier. It's just a tad bit of black or richness that's lacking. When doing copies it's better or even okay. But it's really bad for a new and such a good device to just print a bit too weak. All options (toner density etc.) or trying different drivers didn't do anything. You can take the toner density of black to +8 and absolutely no effect is visible. Only pictures get darker. I guess it's a driver problem... the fonts are rendered differently so that they don't come out as punchy as they should. I had so much hope in the Canon device because the HP idiots decided to put the touch screen in a way you can't place books on the scanner. You can't turn it even to the height of the scanner. Some guys!

I was having the same problem with light print and found that it was the result of having the, "Toner Saver" turned ON.   

 

(All the other gyrations about adjusting the print quality to fix this were completely unnecessary.)

 

 

To turn Toner Saver, OFF follow these simple instructions from the printer's touch pad:

 

1. Press [Menu].

2. Select [Function Settings].

3. Select [Printer].

4. Select [Printer Settings].

5. Select [Printer Quality].

6. Select  [On] or [Off] and then press [Apply].

The default setting is Off.

After the setting has been applied press the  Home button to return to the Home Screen.
 
Voila! The print is dark and readable!
 

 

 

I'm quite sure I checked this twice. And also I had the printer new so all settings are default which shouldn't mean that the Toner Save is on, but I'll check this again.

 

Maybe my black is already okay for THIS printer and it won't get any darker. Printers print differently, so maybe this is just the new Canon print rendition. The older Canon that I have is however the slightest bit too dark compared to HP printers.

Yes @TheWalkman 'Toner Saver' mode would definitely kill the darkness, for sure. Smiley Happy

 

However, the big "to-do" is typically for designers or people who work with designers who will notice everything. Smiley Wink

 

So, while I personally can only draw really good stick figures. Smiley Happy I have been blessed to work for a few people that I would put in the "Disney" catagory like Summit Racing, Chip Foose, Meguiar's, Throttle Design Mechanics, Nike...where even with 'Toner Saver' mode OFF (which it should be OFF by default)...this particular printer causes what again I can only discribe as being almost “Lite-Brown” or like some sort of Lighter Grayscale instead of a “Deep True Black”.

 

Again, I'd say some folks might not notice...but for me it was very noticeable compared to several other Canon Color ImageClass MF730 Series / MF733Cdw printers I had previously installed and configured. So now I'm showing my age, Smiley Tongue but the firm I'd worked for in the 1990's after having worked as an Apple Sales Manager and Level III Tech before that in the early 1990's...that firm, actually had the very first Apple Color LaserWriter in the Northwest (which was huge with rotating drums...but that engine was also a Canon engine back then). So while this is "weird" for this MF743 compared to maybe the thousands of laser printers I've installed over 30 years...this is also the first time I've discovered such a rigmarole is needed to fix something that should be ready to go out of the box.

 

Anyway, hope that might help explain or also help others. Smiley Happy

I can't believe this worked. I wonder why they would not have it print at its best right out of the box.

Thank you times 1000. That worked.

Glad that worked for you both @carebear and @HairyCannonbal Smiley Happy

Great, saved my presentation! Thanks!!
Announcements