cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

IMAGE CLASS MF733Cdw: Two Sided Printing of Management Reports.

dexman335
Enthusiast

Never thought I would need to ask a question. 😦

I own a 743Cdw. The unit gives the option of two sided printing system reports such as the User Report, System Report...etc.

The path is "Output Report"-> "Report Settings"-> "Default Settings for Report Output"->"2-Sided Printing".

If the 2-Sided is set to on, reports will be printed on both sides of pieces of paper. If set to off, reports will print on one side only.

I would like to implement 2-sided report printing on my church's MF733Cdw. However, when I navigate the same path found on the 743, there is no option to print system reports on both sides of paper.

Is there such an option on the 733, or did that first appear with the 743? It would be nice to reduce the number of pieces of paper needed to print multi-page system reports.

The 2-sided printing option found in the general printing section doesn't apply to printing reports.

1 ACCEPTED SOLUTION

dexman335
Enthusiast

I decided to contact Canon Support and spoke with Alex.

He checked his documentation and said that 2-sided printing of system reports was not available on the 733. So, it looks like that the ability to do that was introduced with the 743.

I asked if there was some way to add that feature to the 733 in a future update (not sure how difficult that would be). 

Anywhooo....my question has been answered. 🙂

View solution in original post

2 REPLIES 2

dexman335
Enthusiast

If the option does not exist for the 733, is there any possibility that Canon could add that feature via an update? 😉

dexman335
Enthusiast

I decided to contact Canon Support and spoke with Alex.

He checked his documentation and said that 2-sided printing of system reports was not available on the 733. So, it looks like that the ability to do that was introduced with the 743.

I asked if there was some way to add that feature to the 733 in a future update (not sure how difficult that would be). 

Anywhooo....my question has been answered. 🙂

Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.