cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Canon MF743CDW Prints 1 page then stops and does not print until I re-install drivers

aslonopas
Apprentice

Hello,

 

My CANON MF743CDW will print one job. I then pick new jobs to print and nothing will happen until I re-install the driver. Once I re-install the driver it prints again until I load a new job.

 

I am using MS Windows 10.

 

Thank you.

3 REPLIES 3

Greeetings,

This is very obscure behavior.

 

How is the printer connected, and to what?

 

What application are you printing from?

 

Does the behavior happen when printing from all applicaions, or just one, etc?

 

~Rick
Bay Area - CA


~R5 C (1.0.2.1) ~RF Trinity, ~RF 100~400, +Canon Control Ring

~6D2 (v1.1.1) Retiring ~EF Trinity, others ~DxO PhotoLab Elite ~Windows10/11 Pro ~EVGA RTX 3080Ti FTW3 Ultra ~ImageClass MF644Cdw ~Pixel6 ~CarePaks Are Worth It

Hello, 

 

The printer is connected on my home network. I connected everything to include my iphone, android, and computer (Windows 10) to the printer. This behavior seems to be the same from all applications. 

 

Also, not sure if this is a coincidence, but seems like after the android failed to print, this issue surfaced. I also installed all of the updates on my Windows recently, maybe that is also what caused the issue? Idk. 

 

Please help.

Hector
Product Expert
Product Expert

Hello Aslonopas,

 

If the computer and the printer stop responding after one print and you need to reinstall to continue printing, It looks like there is something blocking the print job on the computer or there is a problem with the spooler service.

 

If you can reconnect and send a print, the printer's network connection should be fine, otherwise a reinstall would be unable to reconnect and send another job. Instead of trying a reinstall, you can try restarting the spooler service on the computer to see if you can print again.

 

  1. You can press the Windows key and the letter R key at the same time on your keyboard. In the run box that appears, you can type in services.msc and click OK.
  2. In the list of services, scroll through and highlight the print spooler service.
  3. Click on the option for restart in the upper left hand corner of the window.

Once the spooler has been restarted, you can try another print to see if the printer starts to respond.

 

If the jobs does not respond or if it just prints one more page and the issue comes back, you can try turning off any of the security software on the computer to see if you are able to print without any problems.

 

If you continue to have issues, I would suggest contacting our support team for assistance at 1-800-652-2666. Our agents would be happy to look further into it for you to see what might be causing the issue.

 

 

Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.